Tesla coil sparks
Home
Up
Tesla coil 4 inch
Tesla coil 6 inch
Tesla coil 18 inch
Solid State
Tesla coil sparks

 

 


STOP PRESS  This is my old site last updated June 2005.  Enjoy the pics here but it is best to shift direct to the new site. Looks the same but lots more stuff and regularly updated.  The full size pictures  are only available there.

CLICK HERE to go to tesladownunder.com index page

 

Tesla coil sparks topics on this page include:

bullet

18 inch coil

bullet

6 inch coil (the best ones)

bullet

4 inch coil and school demo

bullet

Video of 4 inch coil

bullet

Mini coil

18 inch coil  Still under construction.   Currently with 5 foot sparks.


(click to enlarge - if you look closely you can see Mars about '2 feet' above the coil on the left)

6 inch coil (the best ones)

(click to enlarge)

The 6 inch coil has performed better than expected with sparks reaching 8 feet (0.5 million volts).  The photo above shows 7 foot sparks to the closest point of the ladder.  This is with a large topload and a tank capacitance of 92 nF (0.092 uF) at a power in excess of 5 kVA.  A lot of smoke comes from my spark gap at runs of over 5-10 seconds at the highest powers.  I suspect it is metal oxide from the tungsten stationary electrodes and the brass dome nuts and steel bolt heads that form the rotary electrodes. There was no sign of any polycarbonate frame or Tufnol wheel overheating. Despite the leaf blower cooling, the tungsten rods become hot enough to have a visible glow though the yellow polypropylene box after turn off.  The 8 foot (96 inch) spark is exactly 3 times as long as the 32 inch secondary coil that generates it. 

Predicted maximum spark length by John Freau's formula for 3 kW is 1.7 x sqrt 3000 = 96 inches.  For 5 kW it is 120 inches. These seem to be most accurate for large (24 inch diameter) coils. A recently proposed correction by Dr Resonance gives spark length for a 6 inch coil = 0.85 x sqrt (power). This would suggest spark lengths of 27 inches at 3 KW and 35 inches at 5 KW.


(click to enlarge)

Earlier photos reaching up to 6 feet  with a capacitor of 48 nF and a smaller topload at a power of about 5 kVA. They are 10 second exposures showing a variety of types of sparks and streamers. Lots of ground rail strikes resulting in arc-overs from the primary (the bright spot in the right photo). These improved with a smaller toroid under the larger one. In these early photos, It is all supported by a stylish barstool and is precarious, particularly as the toroid is supported by a heavy 12 inch loudspeaker frame including magnet.

(click to enlarge)

This 10 second exposure demonstrates the shaping of the high electromagnetic fields around the main coil that directs away them from the axis of the coil. The strong wind at the time shows the multiple sparks going down the initial ionised path of each main strike (banjo effect). This is best seen on the enlarged view.

horizontal rule

4 inch coil

(click to enlarge)

A shot outside the shed with the smaller coil (above).

(click to enlarge)

These are from a demo at a Fete at our local high school in March 2003. This is my first public display and used an 8ft square faraday cage constructed out of angle iron and chicken wire. The Fete had a medieval theme so the theatrics involved Merlin the magician giving a magic class demonstration.  Then, using a butchers chain mail gauntlet earthed to the cage, I put my hand into the cage and turn on, giving the effect of lightning bolts coming from my hand which is close enough not to show any other streamers. The 'lightning' finger had a high intensity blue LED pulsating inside the gauntlet. I then disappeared and changed into a scientist lab coat and gave a more contemporary explanation and a more conventional display with sparks to the cage 3 feet from the edge of the  toroid. Definitely a hands over the ears display.

(click to enlarge)

I need a bigger shed as I am running out of safe standing room! (above)

Video of 4 inch coil


Run mouse over picture to view an MPEG video (570K) of the 4 inch Tesla coil in action.

horizontal rule

Mini coil

(click to enlarge)

Two inch sparks onto my hand. There is some motion artifact with my hand but not the equipment or sparks. This is done with a clear knowledge of earth paths and at very low power levels on a small coil with no toroid capacitance. Wetting my hand beforehand reduces the sensation to a mild prickle. This is potentially dangerous and should not be attempted on a large coil regardless of power input.

This page was last updated August 28, 2005