|It looks like a normal Laptop. There has to be a way into it..|
|You could try removing all the screws and panels underneath the unit,esp the Plate that is labeled CPU and Memory Cover in the manual. But it wont do you any good, its all fake.!!|
|Your getting really fustrated and going mad,But wait whats this odd looking hole on this top panel?|
May be its a Reset switch? or is it ..is it ..
|Lets carefully poke a strong metal pin, (Battery removed, just incase it shorts out..), its a small plastic catch that when pushed in (About 2 mm) allows you to gently Slid the top cover to the LEFT|
|You can now remove it and gain access to the LEDS and Switches,|
|With that panel removed, the keyboard can now be carefully removed..Take Extreme Care NOT to tear the flexiable connector between the Keyboard and Computer/mainboard.|
Nearly there.. |
See the Metal Sheild, just remove the 2 screws and there you are..!!
Simpily Fit your new Ram and put your laptop back together..|
When fully reassembled then power it up.
If your not sure if you can do this, then DON't as you could be better off letting a Computer Tech do it.