FRP Gridmesh Grating
Page 1 | Page 2

New information now at:  www.LBIE.com/gri.htm

» Products on this page just passed ISO 9002 Quality Control

Gridwalk fiberglass reinforced plastic (FRP) grating have been engineered not only for strength, but also to overcome corrosion problems found in chemical, pulp and paper, electronic, food, beverage, aircraft, automotive, plating, textile, and other industries where corrosive products are used. These are areas where metal grating rapidly deteriorates or creates a constant maintenance problem.

The advanced resin & glass systems and manufacturing techniques employed in the production of Gridwalk fiberglass grating makes it ideal for use in the following locations:

Inherent benefits and characteristics of Gridwalk fiberglass grating make it the product of choice for many industrial applications:

CORROSION RESISTANCE of Gridwalk grating over a wide PH range - both acidic and caustic - is achieved by the use of premium grade resin systems. Whether the grating is exposed to continuous submersion, splash, spills, fumes and gases, you can be assured that Gridwalk FRP grating will outperform metallic grating.

FIRE RESISTANT with a class 1 flame spread rating of 25 or less, Gridwalk grating has been tested in accordance with the ASTM E-84 Tunnel Test Method.

NON-SPARKING Gridwalk grating is ideally suited for those installations where hydrogen or other combustible gases may be present and which may explode or cause a fire from sparks produced by accidental dropping of tools onto the grating.

NON-CONDUCTIVE properties make Gridwalk grating ideally suited for work platforms, flooring and fencing in electrically hazardous locations. These properties greatly reduce the risk of electrical shock for workers in bus areas and around switch gear by allowing the grating to act as an insulator.

NON-MAGNETIC properties allow Gridwalk grating to be used in sensitive installations where the inherent magnetic properties of metallic grating would prove unfavorable.

LOW-THERMAL CONDUCTIVITY makes Gridwalk grating an excellent insulator and safeguard against inadvertent skin-contact with extreme temperature surfaces.

IMPACT-RESISTANCE of Gridwalk grating allows repeated deflections of the grating without being permanently deformed. Substantial deflection will occur with impact of heavy objects. However, once the object is removed, Gridwalk grating will fully recover its original position - unlike metal grating which will remain deformed and require replacement.

The SLIP RESISTANCE feature of Gridwalk grating is created during the molding process by the formation of a concave cross-section on the walking surface of each bar. The (2) knife-edges produced by this process provide positive traction over a wide range of environmental conditions. (A grit surface is also available.)

MAINTENANCE FREEDOM from painting and/or coating of Gridwalk grating is achieved, not only by the inherent corrosion /rust resistance, but also by the molded-in color and ultra violet resistance.

LIGHT-WEIGHT Gridwalk reduces installation and fabrication costs. Full panels can be easily handled by two men without the need of hoists, pulley or dollies. Fabrication or cutting of Gridwalk grating is easily achieved by using either a carbide hack-saw, saber-saw, or jig-saw blade or a circular saw equipped with a masonry type cut-off blade. No cumbersome cutting or welding torches are needed. Cut edges of the grating are sealed with a catalyzed resin to prevent wicking of the fiberglass. Attachment of the grating to the supporting frame work is accomplished using the appropriate hardware discussed below.

Selection of Gridwalk assures you of a grating that not only has a quality appearance, but is also strong - providing you with a longer service life over materials like steel, aluminum or wood. this equates to the best value with a longer service life and lower overall costs.

Standard Grating Parameters

Panel Thickness	Mesh Size (mm)	Panel Size (mm)	Bar Thickness (mm)	Open Area (%)	Weight (kg/m2)	Panel Weight (kgs)
25mm	38x38	3660x1220	6.4	69	11.7	52
38mm	38x38	3660x1220	6.4	69	17.5	78
50mm	50x50	3660x1220	6.4	72	19.5	87

	Panel Installation Ideally Gridwalk panels should be supported on all sides and attached to the supporting frame work with either type 'M' or...
	...type 'L' hold-down clips. A minimum of four (4) clips per side are required for full-size panels.
	Where panels cannot be supported on all sides, use type 'C' end panel clips to unite the two (2) adjacent panels. Clips are sold as sets consisting of clip, bolt, nut and washer, all manufactured from 316 stainless steel.

---

Now also available:

Covered Grating
Stair Treads
Manhole Covers
Filter Grating
Decorating Panels
Sandwich Panels
FRP Light Pole/Flag Pole

---