|
Selecting components
Because Legend loudspeakers are so transparent to musical
signals fed to them, their performance will be limited by
the quality of the other components in your hifi system.
There is no heirachy of importance of hifi components
because the hifi chain is only as strong as its weakest
link. Any distortion of the sound by any equipment in this
chain cannot be corrected by other equipment in the chain.
Legend loudspeakers will be a strong link.
We therefore recommend that you use Legend loudspeakers
with other high quality equipment. To get the best
balance in a stereo system, you should aim to spend
about 25% of your budget on your sources (CD player etc),
25% on your amplifier and 40% on your Legend loudspeakers,
with the remaining 10% on good quality interconnects and
cables.
To get the best from Legend loudspeakers, the equipment
you use should have the same fast open sound as them,
without hardness or brashness. Athough the list below
is by no means exhaustive, some equipment which will
work well with Legend loudspeakers are:-
CD players
Arcam Alpha 9
Denon DCM-360
Denon DCD-3000
Marantz CD-67, 63 and 48
Meridian 508
Music Fidelity A2
NAD 515
Naim CD2
Rotel RCD-951
Rotel RCD-971
Sony XE510, XE900e
Sony CDP-XA7ES
|
Amplifiers
Arcam Alpha 9
Bryston B-60
Classe CAP-100
Denon DRA-275
Jolida SJ 502A
Marantz PM66
ME
Music Fidelity A1000
Naim Nait
Redgum
|
Tuners
Arcam Alpha 7
Denon TU-260L
Denon 425
Meridian 504
NAD 412
Rotel RT-990BX
Sony ST-SE500
|
Home Cinema receivers/processors
Arcam AV50
Denon AVR-3200
Denon AVP-A1
Meridian 565
Yamaha DSP-E492
|
Turntables
Linn Sondek
Project 6
Rega Planar 2/3
|
Interconnects and Cables
Audioquest
Cable Talk
Chord
Kimber
van den Hul
|
|