The Marine Security Systems fire detection panel is a feature packed single zone panel designed specifically to meet the needs of the marine market. The small size does not translate to a limited capability as self-testing eliminates the need for the operator to interpret test results.
| Features | |||||||||
| Small size | |||||||||
| Same size as a wall light switch - 120mm x 80mm | |||||||||
| Intuitive operator interface | |||||||||
| Three position rotary switch with Isolate, Monitor, and Test positions. Status shown on three Leds | |||||||||
| Self testing and fault diagnosis | |||||||||
| In the Test mode, the panel self tests and halts on an error. The Leds indicate the type of error. | |||||||||
| Fault tolerant | |||||||||
| Fully protected against the most common types of faults such as overload, reverse polarity, and short circuits. | |||||||||
| Corrosion resistant design | |||||||||
| No exposed switches | |||||||||
| Current Loop design | |||||||||
| Readily detects heat detector contact corrosion. | |||||||||
| Optional Voltage Regulator | |||||||||
| Can be used on 36 and 48 volt vessels with the optional voltage regulator. | |||||||||
| Specifications | |||||||||
| Supply Voltage: 24 Volts DC nominal, Range 18 - 30 Volts DC | |||||||||
| Alarm Output: Transistor to Battery Negative, 1.5 Amps maximum, fuse protected. | |||||||||
| Detector Compatibility: Any that work at 15 Volts DC | |||||||||
© 2003 Marine Security Systems
