Hot Tub - Spa ToolKit program

Hot Tub version 1.1 Beta (Zip File - 532,085 bytes)

------------------------------------------------------------------------------
Hot Tub - Spa ToolKit
------------------------------------------------------------------------------

Version : 1.1
Last updated : 5 December 2005
Compiler : Delphi 7
Author : Mark Voevodin
Copyright : © 2005 Mark Voevodin
Free for non-commercial use.

Hot Tub - Spa ToolKit
------------------------------------------------------------------------------

Hot Tub - Spa ToolKit, came about from the need to save my Sipura 3000 ATA Configs, after making changes and testing.
Other utilities were either too difficult to use, or were designed to do other things than what I wanted.
Hopefully, with this utility, it will make it easier to load and save configs.

Operation
------------------------------------------------------------------------------

Hot Tub - Spa ToolKit, allows the user to Download a configuration from a SPA Device, Upload a previously saved config, or do a selective save or upload, by ticking the items required.

Installation
------------------------------------------------------------------------------

Create a folder, and unzip the files to this folder. Run the EXE file On Setup page, enter the IP of your SPA device, Port number (default 80). If you have a admin or user password set, enter these in the relevant box's.
Hot Tub is a standalone program, and does not require .NET or Samurize to run.

Note, I have only tested with Sipura 3000 (3.17g) release. The program has been designed to work with all the SPA range. Please let me know if it works for you, on what device, and software version.

Currently supported
SPA 3000 - 3.17g, 3.15b

more will be added as feedback is given.
send feedback to spatoolkit@iinet.net.au

marner

History
Version 1.1 5 December 2005
First Public Beta
Removed Modify section due to speed constraints,
Version 1.0 1 December 2005
Limited Beta release.
Version < 1.0 5 May 2005
Started writing program, (work commitments delayed it until 1 Dec)