VK6ROX B

Homebrew DStar Repeater

WELCOME TO VK6ROX B - INFORMATION SITE

Please take a look at the Homebrew DStar Repeater that is "making some noise" on 70cm in Perth Western Australia.

I invite you to set the relevant parameters in your DStar rig and put out a call.

Mobile receive:438.125MHz

Mobile transmit:432.725MHz

The DStar parameters are:

URCALL CQCQCQ

RPT1    VK6ROX B

RPT2    VK6ROX G

MYCALL    "put your call here" NOTE: it must exactly match one of the callsigns (terminal IDs) registered on the DSTAR registration system - see Links section for this site.

As an example, here are the terminal IDs I have setup for my callsign:

registration example

The repeater has an automatic connection timer and is linked to various reflectors as shown below:

connection times

Times are Perth local time (UTC +8hrs)

GOOD LUCK AND ENJOY!

There are now many knowledgeable DStar operators out there - so don't be shy in asking for help and join the fun























Site last updated 15-2-2014
Added oscilloscope screen captures showing auxilary receiver deviation setting method.
Updated timercontrol screen capture (connection to REF-050C deleted).